Bootvorgang eines Extreme Networks Switches

Beim Boot eines Extreme- Networks Summit Switches gilt folgende Reihenfolge:
1. Bootstrap
2. BootROM
3. ExtremeXOS Image Alle Images werden doppelt auf dem Switch vorgehalten, d.h. in einer primary und einer secondary Variante, die wahlfrei gestartet und auch upgedatet werden können. Reell sieht das dann so aus:
======
* Summit X *
Version 1.0.3.5 Branch trunk by release-manager on Mon 06/30/08
Copyright 2003-2007, Extreme Networks, Inc.
Press and hold the <spacebar> to enter the bootstrap. Starting Primary Bootloader ... Extreme Networks Running POST... PASSED Version 1.0.5.5 Branch trunk by release-manager on Fri 12/05/08
Copyright 2003-2008, Extreme Networks, Inc.
Single Processor System Initializing...
Press and hold the <spacebar> to enter the bootrom.
Loading EXOS Image ... Running Image ... Starting ExtremeXOS 12.5.1b6
Copyright (C) 1996-2010 Extreme Networks.  All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,95
7; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705;
7,017,082; 7,046,665; 7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861; 7,2
45,619; 7,245,629; 7,269,135. ======

Extreme Networks Bootstrap und BootRom

Achtung!!!
Durch Fehlbedienungen kann der Switch dauerhaft unbrauchbar gemacht werden! Im Zweilfelsfall lieber mal den freundlichen Dienstleister fragen!!!

Sowohl in den Bootstrap als auch in das BootRom gelangt man durch das Drücken und Halten der Space-Taste sobald die entsprechenden Meldungen angezeigt werden. Hierzu muss der Switch über ein serielles Kabel mit einem Rechner verbunden sein auf dem ein geeignetes Programm z.B. HyperTerminal gestartet ist. Die Verbindungseinstellungen müssen auf 9600,8,N,1 gesetzt sein. BOOTSTRAP
BootStrap > ?
  loader  Sets which BootLoader BootStrap will boot
  reboot  Reboot system (hard reset)
  enable  enable features
       h  on-line help
    help  on-line help
       ?  on-line help
      hi  display command history
    ping  ping remote host
    boot  boot a loader
       d  display memory
      mt  tests all available memory up to 2GB using 64 bit physical addresses
configip  configure the bootloader ip address
  showip  show the configuration of the bootloader ip address BOOTROM
BootRom > ?
    boot  boot an image
  loader  Sets which BootLoader BootStrap will boot
  reboot  Reboot system (hard reset)
    show  display information
  config  select configuration
  enable  enable features
       h  on-line help
    help  on-line help
       ?  on-line help
    vers  print version info
    eval  evaluate and print result
      hi  display command history
       d  display memory
      mt  tests all available memory up to 2GB using 64 bit physical addresses
     dir  list contents of CF directory
      cd  change working CF directory
     pwd  print working CF directory
    ping  ping remote host
configip  configure the bootloader ip address
  showip  show the configuration of the bootloader ip address
download  download an image BootRom >